Fostex D-108 - Manual (Page 63)

63
D-108 Owner’s Manual (Cue & Review Function)
Cue & Review Function
5. Press the REWIND button instead of the F FWD
button.
This cues in the rewind direction at five-times speed.
The PLAY LED and REWIND LED lights up while cuing is
taking place.
6. Press the PLAY button to restore the original
playback speed.
This chapter explains how to use the “Cue & Review” function with the REWIND button, the F FWD button, and
the SHUTTLE dial, and also explains “Digital Scrubbing” with the envelope function. During Cue/Review and
Digital Scrubbing you will hear the sound recorded on the disk, which makes it easy for you to swiftly locate the
desired point without failure while listening to the sounds.
4. Press the PLAY button again to restore the original
play back speed.
Cue & Review function using the REWIND and F FWD buttons
You may cue & review the audio data at five-times speed while the recorder is playing.
The prerequisite of the following operation is that the time base is ABS, however, the operation can be executed in any
time base. To execute this function with a non-ABS time base there is a need to priory switch over to the desired time
base.
1. Press the PLAY button to play the audio data.
2. Press the F FWD button during playback.
This cues in the forward direction at five-times speed.
The PLAY LED and F FWD LED lights up while cuing is
taking place.
3. Adjust the monitor sound of the track to monitor
on the mixer.
Cue & Review function using the SHUTTLE dial
You can use the SHUTTLE dial for +1~-7 times or -1~-8 times Cue/Review while playing back the recorder section.
5. Similarly, turn the SHUTTLE dial counterclockwise
during playback.
The rewind direction review speed variates from -1~ -8
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and REWIND LED lights up
during the review process.
6. Let go of the SHUTTLE dial to return to normal play
speed.
4. Let go of the SHUTTLE dial to return to normal play
speed.
1. Press the PLAY button to start playback.
2. Turn the SHUTTLE dial clockwise during playback.
The forward direction cue speed variates from +1~ -7
times speed depending on the degree (angle) of turning
the dial. PLAY LED flashes and F FWD LED lights up during
the cue process.
3. Adjust the monitor sound of the track to monitor
on the mixer.