Fostex D-108 - Manual (Page 80)

D-108 Owner’s Manual (MIDI Synchronization)
80
D-108 8TRACK DIGITAL RECORDER
OPTICAL
PREVIEW
ENVELOPE
LOCATE REC END
VARI PITCH
RECORD STOP PLAY REWIND F FWD
PUNCH LOCATE REHEARSAL
TAKE
TIME BASE SEL
RECALL STORE HOLD/
/NO EXIT /YES EXECUTE DISP SEL
REDO UNDO ERASE
AUTO RTN
COPY MOVE PASTE
CLIPBOARD AUTO RTN
OUT IN AUTO PLAY AUTO PUNCH START OUT IN END
TC IN LOCKED HD ACCESS
RECORD TRACK
1/9 2/10 3/11 4/12 5/13 6/14 7/15 8/16
PGM SEL
PUNCH IN / OUT
LOCATE ABS 0
CLIPBOARD PLAY
AUTO
SHIFT
POWER
D-108 8TRACK DIGITAL RECORDER
OPTICAL
PREVIEW
ENVELOPE
LOCATE REC END
VARI PITCH
RECORD STOP PLAY REWIND F FWD
PUNCH LOCATE REHEARSAL
TAKE
TIME BASE SEL
RECALL STORE HOLD/
/NO EXIT /YES EXECUTE DISP SEL
REDO UNDO ERASE
AUTO RTN
COPY MOVE PASTE
CLIPBOARD AUTO RTN
OUT IN AUTO PLAY AUTO PUNCH START OUT IN END
TC IN LOCKED HD ACCESS
RECORD TRACK 1/9 2/10 3/11 4/12 5/13 6/14 7/15 8/16
PGM SEL
PUNCH IN / OUT
LOCATE ABS 0
CLIPBOARD PLAY
AUTO
SHIFT
POWER
D-108 8TRACK DIGITAL RECORDER
OPTICAL
PREVIEW
ENVELOPE
LOCATE REC END
VARI PITCH
RECORD STOP PLAY REWIND F FWD
PUNCH LOCATE REHEARSAL
TAKE
TIME BASE SEL
RECALL STORE HOLD/
/NO EXIT /YES EXECUTE DISP SEL
REDO UNDO ERASE
AUTO RTN
COPY MOVE PASTE
CLIPBOARD AUTO RTN
OUT IN AUTO PLAY AUTO PUNCH START OUT IN END
TC IN LOCKED HD ACCESS
RECORD TRACK 1/9 2/10 3/11 4/12 5/13 6/14 7/15 8/16
PGM SEL
PUNCH IN / OUT
LOCATE ABS 0
CLIPBOARD PLAY
AUTO
SHIFT
POWER
MIDI OUT
MIDI IN
DATA OUT
DATA OUT
DATA IN
DATA IN MIDI IN
MIDI THRU
Equipment interconnections
1.From D-108 (#1) to D-108 (#2), connect DATA OUT to DATA IN and MIDI OUT to MIDI IN.
2.From D-108 (#2) to D-108 (#3), connect DATA OUT to DATA IN and MIDI THRU (Note!!!) to MIDI IN.
Multitrack system by the slave mode
The following will explain an example of constructing a 24 track system using three D-108's and its slave mode
functions.
* Initialize D-108.
* Confirm the program.
* Set all three D-108's to the same sampling frequency.
Setup of D-160 (#1): <Master>
1.Because MTC, which is the reference for sync, is output from D-108 (#1), set the "MIDI sync signal output setting"
of the SETUP mode to "MTC."
# Refer to page "112", SETUP mode "MIDI sync signal output setting" for operating procedure and details.
2.A random frame rate to be used is set by the SETUP mode "MTC Frame rate setting."
# Refer to page "113", SETUP mode "MTC Frame rate setting" for operating procedure and details.
<Note>
In order to slave drive a D-108 with each other, the best setting is to supply Adat digital signals together with MTC from the master.