Genicom LA36 - Manual (Page 59)

4-2
Using Set-Up Mode
How Set-Up Works
The Set-Up mode consists of Set-Up functions which correspond to the printer settings
described in the previous page. Each function generally has many options which
correspond to the print features to be changed. Each option includes many parameters
values to be selected. All the Set-Up functions, options, and values are printed in a logical
sequence on the paper when you enter the Set-Up mode, including the usage of buttons.
You can perform all the Set-Up operations by using buttons on the control panel in the
following order:
– Navigating through the option menu structure.
– Selecting a new value for an option.
– Saving your new printer configuration (permanently or temporarily).
For information on using the printing test and hex dump functions, see the section, “Using
the Diagnostic Functions,” later in this chapter.
Entering the Set-Up Mode
Before entering the Set-Up mode, load continuous feed paper on the tractors as described in
the section, “Using Continuous Forms,” in Chapter 2. Several sheets of paper may be
required to make all of your Set-Up mode selections. Of course, you can use single sheets.
Note: We recommend the use of the push-tractor mode in order to avoid paper jams.
To enter the Set-Up mode:
1. Make sure that the tractors are loaded with continuous feedpaper and that the paper
select lever is set backward.