Genicom LA36 - Manual (Page 75)

4-18
Using Set-Up Mode
(Form Length)
(Left Margin)
(Top-of-Form)
(Top Margin)
(Bottom Margin)
MACRO 1 and
MACRO 2 Options Values Description
<FORM LENGH> Specify the length of the page in inches or by the
number of lines per page.
## INCHES 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11 (Letter size), 11 2/3 (A4
size), 12, 14, or 15
No of LINE 1 to 256 (66)
Number of lines per page
<LEFT MARGN> Specify the left margin by the number of the left
column (see “Print Area Definition” in Chapter 2,
“Paper Handling.”)
No of COLM 1 to 256
Number of the left column
<FORM WIDTH> For LA36W only. Specify the physical right margin.
8 IN 8-inch page width
13.2 IN 13.2-inch page width
13.6 IN 13.6-inch page width
<TOP OF FRM> Specify the top of form in 1/60 inches. See “Print
Area Definition” in Chapter 2, “Paper Handling.”
## /60 IN 0 to 99
Number of 1/60 inches
<TOP MRGN> Specify the number of the top line. See “Print Area
Definition” in Chapter 2, “Paper Handling.”
## LINES 1 to 256
Number of the top line
<BOTTOM MRG> Specify the number of the bottom line. See “Print
Area Definition” in Chapter 2, “Paper Handling.”
## LINES 1 to 256 (66)
Number of the bottom line
<LINE MODE> Specify the effect of LF (Line Feed) and CR
(Carriage Return) codes.
LF=LFCR=CR
LF=LF+CR
CR=LF+CR
LFCR=LF+CR
CR=CR: No line feed is added to a carriage return.
To be continued