Genicom LA36 - Manual (Page 74)

4-17
Using Set-Up Mode
Macro 1 and
Macro 2 Options Values Description
<PRTCL PARL> Select a protocol for the parallel interface. This is
invalid and skipped when
PORT DEPND is not
selected for the <PROTOCOL> option.
DEC PPL2 DEC PPL2 printers
IBM PPX24 – IBM Proprinter X24E printers (LA36N)
– IBM Proprinter XL24E printers (LA36W)
(Either is selected as factory setting for Macro 1.)
EPSON ESCP Epson printers using the ESC/P2 protocol (factory
setting for Macro 2)
<FONT> Select a font to be active when the power is turned on.
For fixed-spaced fonts, be sure to change the
horizontal pitch as well.
DRAFT Draft font (lower resolution than letter quality, 3 times
the speed of letter quality)
HSDRAFT High-speed draft font (lower resolution than draft
quality, 3.3 times the speed of letter quality)
HI-IMPACT High-impact draft font (lower resolution than letter
quality, 1.5 times the speed of letter quality with high
copying capability)
PICA Pica 10 font
COURIER Courier 10 font
PRESTIGE Prestige 12 font
COMPRESSED Compressed 17 font
BOLDFACE Boldface PS font
TIMELESS Timeless PS font
NIMBUS-SAN Nimbus-Sans PS font
OCR A OCR A 10 font
OCR B OCR B 10 font
<HORZ PITCH> ## CPI 10, 12, 13.2, 15, 16.5, 17, 18, or 20
(characters per horizontal inch)
<VERT PITCH> ## LPI 2, 3, 4, 6, 8, or 12
(lines per vertical inch)
## LPCM 1, 2, or 4
(lines per centimeter)
(Protocol Parallel)
(Horizontal Pitch)
(Vertical Pitch)