Genicom LA36 - Manual (Page 62)

4-5
Using Set-Up Mode
Overview of the Set-Up Mode
When you enter the Set-Up mode, the following <FUNCTIONS> menu is printed:
<FUNCTIONS>
MACRO 1 MACRO 2 PRINT INSTALL ADJUST TESTS RCALL-FACT MENU-ACCESS SAVE&EXIT
The following table summarizes the purpose of each function.
Set-Up Mode Functions
Function Purpose
MACRO 1 and MACRO 2 Assigns print features to MACRO 1 and MACRO 2
PRINT Prints the Printer Configuration
INSTALL Changes the Set-Up menu language, computer interface, and
paper feed control options
ADJUST Changes the top-of-form fine adjustment options
TESTS Runs the printing test and hex dumps
RCALL-FACT Resets factory settings in MACRO 1 , MACRO 2 , INSTALL ,
and ADJUST
MENU-ACCESS Restricts access to Set-Up functions from the control panel
SAVE&EXIT Exits the Set-Up mode and saves any changes made in the
Set-Up mode
To select a function from the <FUNCTIONS> menu:
1. Repeatedly press the button or the button to position the red cursor on the
plastic print guide under the function you require.
2. Press the button or the button to select the function. If the function has options and
values, the printer prints the first option and its values. The MACRO 1 , MACRO 2 ,
INSTALL , ADJUST , TESTS , and MENU-ACCESS functions contain options that
have selectable values. The other functions have neither options nor values.