Marantz DV9600 - Manual (Page 52)

DVD Setup Menu 6
52
HDMI
This setting is used when the unit is con-
nected by HDMI or DVI with a TV or projec-
tor.
This setting can be toggled On and Off by
pressing the HDMI/DVI RESOLUTION
button on the front panel for three seconds
or more. HDMI is On when the unit is
shipped from the factory.
OTHERS
ENTER RETURN SETUP
On Screen Display : On
: On
: On
: On 30 Min
: Password
: Off
Angle Mark
Bonus Group
Pure Mode
Auto Power Off
Economy Mode
HDMI
i.LINK :
Press ENTER
OTHERS
ENTER RETURN SETUP
: Mode B
: Auto
: RGB Normal
: 4:3 L-Box
Format
TV Aspect
Audio
DVI Output
HDMI
: 480i/576i(525i/625i) Resolution
Note
• This unit supports HDMI Ver. 1.1.
• This unit does not support HDMI control
functions (CEC).
1 Select Resolution Resolution Resolution Resolution Resolution
OTHERS
ENTER RETURN SETUP
· 480p/576p(525p/625p)
· 1080p(1125p)
· 1080i(1125i)
· 720p(750p)
Resolution
HDMI
· 480i/576i(525i/625i)
• 480i/576i (525i/625i)
• 480p/576p (525p/625p)
• 720p (750p)
• 1080i (1125i)
• 1080p (1125p)
Select one of the above with the cursor buttons
(
5/∞) and then press the ENTER button.
Note
• The resolutions available for HDMI outputs
depend on the connected TV or projector.
Resolutions supported by the connected
component are indicated on the display with an
asterisk (*).
• If, after changing the resolution, images are not
displayed properly on the TV or projector, press
and hold the CLEAR button on the Remote
Control for three seconds. Then return to
Setup menu. (page 15)
• When the resolution changes, the image may be
corrupted or the output may take longer than
normal.
• When 480i/576i has been selected, multi-
channel PCM at sampling frequency of 96kHz
cannot be output. The multi-channel PCM is
converted to 48kHz/2ch before being output.
• When 480p/576p has been selected, multi-
channel PCM at sampling frequency of 96kHz
cannot be output if the connected TV, projec-
tor, etc. is not compatible with WCLOCK. The
multi-channel PCM is converted to 48kHz/2ch
before being output.
• In general, the larger the number, the higher the
resolution.
• The resolution is set to 480p/576p (525p/
625p) when the unit is shipped from the
factory.
• The resolution can also be set with the HDMI/
DVI RESOLUTION button on the front panel.
(page 13)
2 Select Format Format Format Format Format
• RGB-Normal
• RGB-Expand
• YCbCr-1 (4:4:4)
• YCbCr-2 (4:2:2)
Select one of the above with the cursor buttons
(
5/∞) and then press the ENTER button.
Note
• Image data values in RGB-Normal format range
between 16 (black) and 235 (white).
• Image data values in RGB-Expand format range
between 0 (black) and 246 (white).
• The formats available for HDMI outputs depend
on the connected TV or projector. For details,
see the user’s manual of your TV or projector.
• Only RGB-Normal and RGB-Expand can be
selected for DVI outputs.