Marantz DV9600 - Manual (Page 65)

7 Additional Information
65
English
i.LINK related display messages
NODE OVER
LOOP CONNECTOR
HOP OVER
BUS FULL
LINK CHECK
CANNOT LINK
Meaning
The number of connected
components, including this
unit, is more than 63.
An i.LINK connection has
formed a loop.
More than 17 i.LINK compo-
nents have been connected in
a daisy-chain configuration.
The maximum transmission
capacity of i.LINK has been
reached.
The i.LINK connection
configuration is being con-
firmed. Audio may be inter-
rupted if this message occurs
during playback.
The i.LINK connection could
not be established correctly.
Correction
Reduce the number of
connected components to 63
or less.
Disconnect the cable forming
the loop.
Reduce the number of daisy-
chained components to 17 or
less.
Does the connected compo-
nent support the i.LINK
AUDIO format?