Multi-Tech Systems MVP210-SS - Manual (Page 166)

Technical Configuration MultiVOIP User Guide
166
“Custom Fields” Definitions (cont’d)
Field Description Field Description
Bytes
Sent Total bytes sent in
call. Bytes
Received Total bytes received
in call.
Packets
Lost Packets lost in
call. Coder Voice Coder
/Compression Rate
used for call will be
listed in log.
Outbound
Digits
Received The DTMF dialing
digits received by
this gateway from
the remote
gateway
presuming that
DTMF is set to
"Out of Band." Prefix
Matched When selected, the
phonebook prefix
matched in
processing the call
will be listed in log.
Call
Status Successful or
unsuccessful. Call Type Indicates the Call
Signaling protocol
used for the call
(H.323, SIP, or SPP).
Call
Direction Indicates call’s
originating party. DTMF
Capability Indicates whether the
DTMF dialing digits
are carried "Inband"
or "Out of Band." The
corresponding field
values differ for the 3
different voip
protocols.
For H.323, this field
can display "Out of
Band" or "Inband".
For SIP it can display
either "Out of Band
RFC2833" or "Out of
Band SIP INFO" to
indicate the out-of-
band condition or
"Inband" to indicate
the in-band condition.
For SPP it can
display "Out of Band
RFC2833" or
"Inband".