Multi-Tech Systems MVP210-SS - Manual (Page 325)

MultiVOIP User Guide Operation & Maintenance
325
MultiVOIP Program Menu (cont’d)
Menu Selection Description
Download Factory Defaults Select this to return the configuration
parameters to the original factory
values.
Download Firmware Select this to download new versions
of firmware as enhancements become
available.
Download IFM Firmware Select this to download new versions of
IFM firmware as enhancements become
available. The Interface Module (IFM) is
the telephony interface for analog
MultiVOIP units (MVP130, MVP130FXS,
MVP210, MVP410, MVP810). There is one
IFM for each channel of the MultiVOIP
unit. For each channel, the IFM handles
the analog signals to and from the attached
telephone, PBX or CO line.
Download User Defaults To be used after a full set of parameter
values, values specified by the user,
have been saved (using Save Setup).
This command loads the saved user
defaults into the MultiVOIP.
Set Password Select this to create a password for
access to the MultiVOIP software
programs (Program group commands,
Windows GUI, web browser GUI, &
FTP server). Only the FTP Server
function requires a password for access.
The FTP Server function also requires
that a username be established along
with the password.
Uninstall Select this to uninstall the MultiVOIP
software (most, but not all components
are removed from computer when this
command is invoked).
Upgrade Software Loads firmware (including H.323
stack) and settings from the controller
PC to the MultiVOIP unit. User can
choose whether to load Factory
Default Settings or Current
Configuration settings.