Multi-Tech Systems MVP210-SS - Manual (Page 221)

MultiVOIP User Guide T1 PhoneBook Configuration
221
Add/Edit Inbound Phone Book: Field Definitions
(cont’d)
Field Name Values and Description
Ring Count 0, 1, 2, 3, etc. When “No Response” is
condition for forwarding calls, this
determines how many unanswered rings
are needed to trigger the forwarding.
Registration
Option
Parameters
In a SIP voip system, gateways can register
with the SIP Proxy.
5. When your Outbound and Inbound PhoneBook entries are
completed, click on Save Setup in the sidebar menu to save your
configuration.
You can change your configuration at any time as needed for your
system.
Remember that the initial MultiVOIP setup must be done locally or via
the built-in Remote Configuration/Command Modem using the
MultiVOIP program. After the initial configuration is complete, all of
the MultiVOIP units in the VOIP system can be configured, re-
configured, and updated from one location using the MultiVOIP web
GUI software program or the MultiVOIP program (in conjunction with
the built-in modem).