Multi-Tech Systems MVP210-SS User Manual
Page 84
Advertising
![background image](/manuals/121697/84/background.png)
Software Installation
MultiVOIP User Guide
84
8. Transient screens will flash by as files are being copied.
Then a completion screen will appear.
Click
Finish.
9. When setup of the MultiVOIP software is complete, you will be
prompted to run the MultiVOIP software to configure the VOIP.
Software installation is complete at this point. You may proceed with
Technical Configuration now or not, at your convenience.
Technical Configuration instructions are in the next chapter of this
manual.
Advertising