Multi-Tech Systems MVP210-SS - Manual (Page 95)

MultiVOIP User Guide Technical Configuration
95
Config Info CheckList
Type of Configuration
Info Gathered MultiVOIP
Configuration
screen on which
to enter the Info Info
Obtained
√
Info
Entered
√
IP Info for voip unit
● IP address
● Gateway
● DNS IP (if used)
●802.1p Prioritization
(if used)
Ethernet/IP
Parameters
Interface Type
(Choices: E&M,
FXS/FXO*, DIP, DPO)
Interface
Parameters
*In FXO/FXS
systems, channels
used for phone,
fax, or key
system are FXS;
channels used
for analog PBX
extensions or
analog telco lines
are FXO.
E&M info
(only if E&M is used)
● Type (1-5)
● 2 or 4 wires?
● Dial Tone or Wink?
Interface
Parameters
Country Code Regional
Parameters
Email address for voip
(optional) SMTP Parameters
Reminder: Be sure to Save Setup after entering
configuration values.