Multi-Tech Systems MVP210-SS - Manual (Page 43)

MultiVOIP User Guide QS: Phonebook Starter Config.
43
6. In the “Remove Prefix” field, enter the initial PBX access digit (“8” or
“9”).
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
Answer
: enter 8 in “Remove
Prefix” field of
Seattle Outbound
Phonebook.
London/Birming. system.
Answer
: enter 9 in “Remove
Prefix” field of
London Outbound
Phonebook.
Euro, International Call Example
Rotterdam/Bordeaux system.
Answer
: enter 9 in “Remove Prefix” field of Outbound
Phonebook for Rotterdam voip.
Some PBXs will not ‘hand off’ the “8” or “9” to the voip. But for those PBX
units that do, it’s important to enter the “8” or “9” in the “Remove Prefix”
field in the Outbound Phonebook. This precludes the problem of having to
make two inbound phonebook entries at remote voips, one to account for
situations where “8” is used as the PBX access digit, and another for when
“9” is used.
7. In the “SIP” field group, select “Use Proxy” and specify the Transport
Protocol to be used (TCP or UDP). Use the default SIP Port Number
(5060).
8. Click OK to exit from the Add/Edit Outbound Phonebook screen.