Muratec MFX-2590 - Manual (Page 148)

1
2
3
OfficeBridge
Administrator Settings
Setting the Connection Environment 3-65
Setting Description Settings
SSL Set “ON” to use SSL communication, or “OFF”
to not use it. ON
OFF
SMTPS Port
Number Enter the SMTPS port number. 0 - 65535: 465
SMTP Send
Authentication Set the SMTP authentication method when
the SMTP server you are using requires
authentication. Not used.
LOGIN
PLAIN
CRAM-MD5
SMTP
Authentication
User Name Set the account to use when logging on to the
SMTP server. 50 characters
SMTP
Authentication
Password Set the password to use when logging on to the
SMTP server. 50 characters
POP before
SMTP Set this to “ON” to receive e-mail before
sending.
For some providers, POP authentication is
required before you send e-mail (before a send
request to the SMTP server). In such a case, set
this item. ON
OFF
POP Server Setting
Setting Description Settings
POP3 Server
Address Enter the IP address or domain name for the
POP server to use when transmitting e-mail. Use the XXX.XXX.XXX.
XXX format for an IP
address. (Where XXX
is a number between
0 and 255.) 0.0.0.0,
255.255.255.255, and
127.xxx.xxx.xxx cannot
be entered.
For a domain name, you
can enter 50 characters
(0 - 9, a - z, A - Z, -, .).
POP3 Port
Number Enter the POP port number 0 - 65535: 110
SSL Set “ON” to use SSL communication, or “OFF”
to not use it. ON
OFF
POP3S Port
Number Enter the POP3S port number 0 - 65535: 995
POP Receive
Authentication Set the POP authentication method when
the POP server you are using requires
authentication. Normal
APOP
POP3 User
Name Enter the account to use when logging on to the
POP3 server. 50 characters
POP3 User
Password Enter the password to use when logging on to
the POP3 server. 50 characters
Check for new
mail Set whether to check the server for new mail.
To check for new mail, select the periodic
interval to check for mail. You can specify the
time interval between 0 (hours) 0 (minutes)
5 (seconds) and 99 (hours) 59 (minutes) 59
(seconds).
*1
ON
OFF
Interval
hr: 0 - 99
min: 0 - 59
sec : 0 - 59
*1 If you set Check for new mail to “ON”, you cannot set “0” for all the values.