Muratec MFX-2590 - Manual (Page 163)

3-80 Specifying Device Settings
Set the detailed information.
4
You can register the following items.
Setting Description Settings
E-mail Gateway *1 Specify the settings for the e-mail gateway function. −
Setting Set whether to enable or disable the e-mail gateway
function.
Set “ON” to enable the function, or “OFF” to disable it. OFF
ON
Prefix Enter the prefix for the local part of the e-mail address. 32 characters
Suffix Enter the suffix for the local part of the e-mail address. 48 characters
Automatic
Logout Time You can set the time it takes before the machine
automatically logs out the user if no operations have
been performed on the machine. This is the logout
setting on the control panel. 1 - 10 Minutes: 3
Minutes
Scan to Printer
Clear You can delete the printer information registered in the
Scan to Print Monitor.
• Select the checkbox for the printer information to
delete, and click [Delete].
• To select all the displayed printer information, select
the “Printer” checkbox.
• Click the same checkbox to deselect the item.
−
Network
Connection
Setting Switches the communication speed and communication
method. Change this setting when errors occur during
network communication. Auto
100Mbps - Full
Duplex
100Mbps - Half
Duplex
10Mbps - Full
Duplex
10Mbps - Half
Duplex
*1 Make sure the total number of characters for the prefix, fax number, and suffix is
within 50 characters.
Click [Save].
5
The display returns to the “Machine Setup” list screen.