Muratec MFX-2590 User Manual

Page 152

Advertising
background image

1
2

3

OfficeBridge

Administrator Settings

Setting the Connection Environment 3-69

Setting

Description

Settings

Response to
MDN Request

*4

Set whether to return a message disposition notification
(MDN) when e-mail is received with an MDN request.

Never send a
MDN.
Always send a
MDN.

Allow reply
to:

If you select “Always send a MDN.”, you can specify to
return an MDN only for messages received from the
specified e-mail addresses or domain names.
You can register up to five e-mail addresses or domain
names to allow to reply to.
If nothing is registered in the list, an MDN is sent for all
e-mail addresses or domain names.

<To add an e-mail address or domain name>
Enter the e-mail address or domain name in the entry
box, and click [Add].
<To delete an IP address or domain name>
Select the e-mail address or domain name to delete, then
click [Delete]. To select all the registered e-mail address
and domain name, chick [Select All].

50 characters
(0 - 9, A - z, @,
., -, _)

Response to
Fax Forwarding
Request

*5

Specify whether or not to accept a fax forwarding request,
if any, for a received e-mail message.

Reject the
forwarding
request.
Accept the
forwarding
request

Forwarding
Result:

If you select “Accept the forwarding request”, specify
whether to notify the sender of the fax forwarding result.

Send to
author.
Do not send.

E-mail
address
or domain
name that
will accept
forwarded
transmissions

If you select “Send to author.”, you can specify to forward
faxes only for forwarding requests received from the
specified e-mail addresses or domain names. You can
register up to five e-mail addresses or domain names to
allow forwarding requests for.
If nothing is registered in the list, an MDN is sent for all
e-mail addresses or domain names.

<To add an e-mail address or domain name>
Enter the e-mail address or domain name in the entry
box, and click [Add].
<To delete an IP address or domain name>
Select the e-mail address or domain name to delete, then
click [Delete]. To select all the registered e-mail address
and domain name, chick [Select All].

50 characters
(0 to 9, A - z, @,
., -, _)

*1 Select “TIFF-S (T.37 Simple Mode)” when the document size is A4 or smaller and the

resolution is 200 dpi or below. Select “TIFF-F (Expand Mode)” when the document size
is larger than A4 or the resolution is above 200 dpi.

*2 If e-mail is broadcast in large volumes to multiple addresses, some servers may not

accept the e-mail transmissions. If this happens, select “Don't show any recipients.”.
With this selected, the destination information is not written in the e-mail.

*3 Depending on the mail server or the mail software on the receiving side, there may be

no response to delivery confirmation or reading confirmation requests.

*4 If you select “Always send a MDN.”, but do not add specific e-mail addresses or domains

to allow the response for, an MDN is sent for all e-mail addresses.

*5 If you select “Accept the forwarding request.”, but do not add specific e-mail addresses

or domains to allow forwarding requests for, fax forwarding is performed for all e-mail
addresses.

Advertising
This manual is related to the following products: