Muratec MFX-2590 - Manual (Page 217)

3-134 Setting Security
Click [Save].
5
The message “Changing the “Machine Policy” will reboot the machine automatically.” is •
displayed.
Press [Back] to cancel registering the machine policy settings and return to the “Machine
•
Policy” list screen.
Click [OK].
6
The machine is restarted to reflect the machine policy settings. •
You will become unable to access OfficeBridge because the machine is restarted. Log in again •
after restarting the browser.
Note
Underlined values are the default settings specified at the time of shipment. •
Click [Initialize] to restore the default settings. •
If you become unable to access OfficeBridge after setting access restrictions, perform •
“Delete Restriction Settings” from the control panel of the machine. For details, refer
to Chapter 2, “Specifying the Network Settings” in the Administrator's Guide.
Setting Access Restrictions
In OfficeBridge, you can set access restrictions based on the MAC addresses or IP
addresses that send access requests from an external network.
You can restrict 50 MAC addresses and 50 IP addresses.
Note
Access cannot be restricted for requests from a network in another segment because
MAC addresses are not retained.
Click [Admin Login] in OfficeBridge, and log in.
1
(See page 2-7.)
This function may also be available on Guest and User login screen, depending on user policy
settings.
Click [Machine Management Settings], and then [Secure Settings].
2
Click “Network Filtering”.
3
The “Network Filtering” screen is displayed.