Muratec MFX-2590 - Manual (Page 155)

3-72 Setting the Connection Environment
Set the detailed information.
4
You can register the following items.
Setting Description Settings
Name Enter the name to set. 23 characters
LDAP Server
Address Enter the name or IP address (IPv4 only) of the
LDAP server to set. This item is required. For an LDAP server
name, 99 characters
Use the XXX.XXX.
XXX.XXX format for
an IP address. (Where
XXX is a number
between 0 and 255.)
Port Number Enter the port number of the LDAP server to set. 0 - 65535: 389
LDAP Server
Login Set whether a login is required to access the
LDAP server. If you select “ON”, set OfficeBridge
User login, Account ID, and Password. ON
OFF
OfficeBridge
User login Set whether to log in using an account and
password registered in the user information. For
details, refer to “
Registering Users ”. (See page
3-5.)
ON
OFF
Account ID If “LDSP Server Login” is set to “ON” and “User
login” is set to “OFF”, enter the account to use for
logging in to the LDAP server. 49 characters
Password If “LDSP Server Login” is set to “ON” and “User
login” is set to “OFF”, enter the password to use
for logging in to the LDAP server. 29 characters