Invacare 1080556 User Manual

Page 25

Advertising
background image

Part No. 1080556 Rev. I

25

Solara™

FRONT RIGGINGS

COMPOSITE/ARTICULATING FOOTPLATE HEEL LOOP

REPLACEMENT (FIGURE 5)

DISASSEMBLY

Composite.
1. Remove the hex screw and coved spacer

that secure the lower footrest assembly
to the swing away footrest assembly.

2. Remove the lower footrest assembly.
3. Remove the phillips screw and locknut

that secure the heel loop to the footrest.

4. Slide heel loop off of the footrest.

Articulating.
1. Remove the phillips screws, washers and

spacers that secure the heel loop to the
articulating footplate.

REASSEMBLY

1. Replace heel loop.
2. Reverse the disassembly procedures.
NOTE: When securing the heel loop to the footrest as-
sembly, tighten phillips screw until the spacer is secure.

Lower Footrest

Assembly

Locknut

Heel

Loop

ARTICULATING

FOOTPLATE

Spacer

Spacer

Phillips Screw

Heel

Loop

FIGURE 5 - COMPOSITE/

ARTICULATING FOOTPLATE

HEEL LOOP REPLACEMENT

Phillips

Screws

COMPOSITE FOOTPLATE

Hex Screw and Coved Spacer

Swingaway Footrest Assembly

Washer

INSTALLING/REMOVING ELEVATING LEGREST/CALFPAD

ASSEMBLY (FIGURE 6)

INSTALLING

1. Insert the footplate assembly into the

calfpad assembly and secure it with bolt and
nut.

2. Place legrest/calfpad assembly on the

outside of the wheelchair and insert
legrest mounting pin into the legrest
mounting tube on the wheelchair frame.

3. Rotate legrest/calfpad assembly toward the

inside of the wheelchair until it locks in
place.

NOTE: The calfpad of the legrest will be on the
inside of the wheelchair when locked in place.
4. Repeat STEPS 1-3 for the other legrest

assembly.

5. Adjust the footplate to the correct height by loosening the bolt and nut and sliding the

inner tube up or down until desired height is achieved. Securely tighten bolt and nut.

REMOVING

1. Push the legrest release handle inward while rotating the footrest outward.
2. Lift the legrest assembly out of the legrest mounting tube.

FIGURE 6 - INSTALLING/

REMOVING ELEVATING LEGREST/

CALFPAD ASSEMBLY

Legrest Mounting Pin

Footplate Assembly

Bolt and

Nut

Calfpad

Assembly

Release

Handle

Legrest

Mounting

Tube

Wheelchair

Frame

FRONT RIGGINGS

PROCEDURE 4

FRONT RIGGINGS

Advertising
This manual is related to the following products: