Invacare 1080556 - Manual (Page 39)

Part No. 1080556 Rev. I 39 Solara™
INSTALLING/REMOVING THE STROLLER HANDLES
(FIGURE 2)
INSTALLING
1. Remove the plug buttons from both back canes, if necessary.
2. Slide the stroller handle into the back canes.
3. Align the mounting holes of the stroller handle and the back canes.
4. Press the button on the quick-release pin and insert the quick-release pin through the
back cane and stroller handle.
5. Release the button on the quick-release pin.
6. Pull on the stroller handle to make sure it is locked securely in place.
REMOVING
1. Push in the button of the quick-release pins.
2. Pull out the quick-release pins that secures the stroller handle to the back canes.
3. Remove the stroller handle from the wheelchair and discard.
4. Install the NEW stroller handle. Refer to INSTALLING THE STROLLER HANDLES in this
procedure of the manual.
FIGURE 2 - INSTALLING/REMOVING THE STROLLER HANDLES
Quick-Release Pin
Back Cane
Stroller Handle
Button
Mounting
Holes
BACK/SEAT
BACK/SEAT
PROCEDURE 6 BACK/SEAT