Invacare 1080556 - Manual (Page 66)

Solara™ 66 Part No. 1080556 Rev. I
INSTALLING THE CONTRACTURE ASSEMBLY - FORWARD MOUNT
(FIGURE 2)
NOTE: The number of mounting positions on the contracture assembly may vary due to the width of the
wheelchair.
1. Align the mounting holes of the outer tube with the mounting holes of the insert tube of
the crossmember assembly.
2. Align the mounting holes of the contracture footplate assembly with two (2) desired
mounting positions of the crossmember assembly.
3. Secure the contracture assembly to the crossmember assembly with the two (2) mounting
screws, washers and locknuts provided. Securely tighten.
4. If necessary, repeat STEPS 1-4 for the other contracture assembly.
Contracture
Assembly
Insert Tube
Washers
Mounting Holes
Mounting Screws
Lock Nuts
Outer Tube
FIGURE 2 - REMOVING/INSTALLING THE CONTRACTURE ASSEMBLY -
FORWARD MOUNT
INSTALLING THE CONTRACTURE ASSEMBLY - REVERSED MOUNT
(FIGURE 3)
1. Remove the contracture footplate. Refer
to CONTRACTURE FOOTPLATE
HEIGHT ADJUSTMENT in this procedure
of the manual.
2. Align the mounting holes of the contrac-
ture footplate assembly with two (2)
desired mounting positions of the
crossmember assembly.
3. Secure the contracture assembly to the
crossmember assembly with two (2)
mounting screws, washers and locknuts
provided. Securely tighten.
4. Reinstall the contracture footplate. Refer
to CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT in this procedure of the
manual.
5. If necessary, repeat STEPS 1-4 for the other contracture assembly.
CONTRACTURE
FOOTPLATE OPTION
Contracture Assembly
Insert Tube
Washers
Mounting Hole
Mounting
Screws
Lock
Nuts
FIGURE 3 - REMOVING/
INSTALLING THE
CONTRACTURE ASSEMBLY -
REVERSED MOUNT
Outer Tube
CONTRACTURE FOOTPLATE
OPTION
CONTRACTURE FOOTPLATE OPTION PROCEDURE 11