Invacare 1080556 - Manual (Page 28)

Solara™ 28 Part No. 1080556 Rev. I
ADJUSTING ARMREST
1. Unlock the armrest assembly by flipping the armrest release lever on the top front of the
arm to the UP (HORIZONTAL) position as shown in DETAIL "A".
2. Adjust armrest assembly to desired height.
3. Lock the armrest assembly by pressing the release lever into the DOWN (VERTICAL)
position as shown in DETAIL "A".
4. Pull up on the armrest assembly to ensure the armrest is locked in place.
5. Repeat STEPS 1-4 for opposite side of wheelchair, if necessary.
Locked - Down
(Vertical)
Unlocked - Up
(Horizontal)
Armrest Release Lever
Armrest
Assembly
FIGURE 1 - INSTALLING/REMOVING/ADJUSTING DUAL POINT
ARMREST
Adjusts Armrest
Height
Arm Socket
DETAIL "A" DETAIL "A" DETAIL "A" DETAIL "A" DETAIL "A"
PROCEDURE 5 ARMS
ARMS
ARMS