Invacare 1080556 - Manual (Page 33)

Part No. 1080556 Rev. I 33 Solara™
ADJUSTING NON-LOCKING CANTILEVER ARM ANGLE (FIGURE 7)
1. Loosen the mounting screw securing the cam to the cantilever arm.
2. Rotate the cam until the desired angle (DETAIL "B" of FIGURE 7) is achieved.
3. Tighten the mounting screw securing the cam to the cantilever arm.
Cam
DETAIL "A" -
SIDE VIEW OF CAM
Cantilever
Arm
Back Cane
Back Cane
Cantilever Arm
FIGURE 7 - ADJUSTING NON-LOCKING CANTILEVER ARM ANGLE
DETAIL "B" - CAM POSITIONS
Back Cane
Cam
0° ARM ANGLE
Back Cane
Cam
4° ARM ANGLE
Back Cane
Cam
8° ARM ANGLE
Back Cane
Cam
12° ARM ANGLE
Back Cane
Cam
16° ARM ANGLE
NOTE: All arm angles are relative to the back cane.
ARMS
PROCEDURE 5 ARMS
ARMS