Invacare 1080556 - Manual (Page 38)

Solara™ 38 Part No. 1080556 Rev. I
BACK/SEAT PROCEDURE 6
BACK/SEAT
This Procedure Includes the Following:
Folding/Unfolding Back Assembly
Installing/Removing the Stroller Handles
Installing/Removing/Adjusting the Adjustable Angle Stroller Handles
Installing/Replacing Seat Positioning Straps
Installing/Replacing Chest Positioning Straps
Installing/Replacing The Back Upholstery
Installing the Seat Cushion
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attach-
ing hardware is tightened securely - otherwise injury or damage may result.
FIGURE 1 - FOLDING/UNFOLDING BACK ASSEMBLY
Back Release Cord
Release Latch
FOLDING/UNFOLDING BACK ASSEMBLY (FIGURE 1)
WARNING
The back MUST be locked securely in place BEFORE using the wheelchair.
NOTE: When folding or unfolding the back, make sure the back release cord does not get caught in the
release latches.
1. Do one (1) of the following:
A. UNFOLD - Push/pull the back towards rear of wheelchair until it locks in place.
B. FOLD - Pick up on the back release cord and push the back towards the front
of the wheelchair.
BACK/SEAT