Using the wheel locks, Installing/adjusting anti-tippers (figure 4) – Invacare 1080556 User Manual

Page 53

Advertising
background image

Part No. 1080556 Rev. I

53

Solara™

USING THE WHEEL LOCKS

FOOT ACTIVATED WHEEL LOCKS - 12-INCH WHEELS ONLY
(FIGURE 2)

1. To engage, push DOWN on crossbar lever of wheel lock assembly.
2. To disengage, lift UP on crossbar lever.

FIGURE 2 - FOOT ACTIVATED WHEEL LOCKS -

12-INCH WHEELS ONLY

FRONT WHEEL LOCKS - 20 OR 22-INCH WHEELS ONLY (FIGURE 3)

1. Push the wheel lock handle forward to engage the wheel locks.
2. Reverse STEP 1 to disengage the wheel locks.

FIGURE 3 - FRONT WHEEL LOCKS - 20

OR 22 INCH WHEELS ONLY

Wheel Lock Assembly

Rear Wheel

Wheel Lock Handle

INSTALLING/ADJUSTING ANTI-TIPPERS (FIGURE 4)

NOTE: A 1-1/2 to 2-1/4-inch clearance between the bottom of the anti-tipper wheels and the floor MUST
be maintained at all times.

INSTALLING

1. Remove the anti-tippers from the accessory carton.

WARNING

Anti-tippers MUST be fully engaged and spring buttons fully protruding out of
adjustment holes.

WHEEL LOCKS/

ANTI-TIPPERS

Wheel Lock Assembly

Crossbar Lever

Rear Wheel

WHEEL LOCKS/ANTI-TIPPERS

PROCEDURE 9

WHEEL LOCKS/ANTI-TIPPERS

Advertising
This manual is related to the following products: