Replacing back/headrest upholstery (figure 2), Adjusting the recliner cables – Invacare 1080556 User Manual

Page 57

Advertising
background image

Part No. 1080556 Rev. I

57

Solara™

REPLACING BACK/HEADREST UPHOLSTERY (FIGURE 2)

BACK UPHOLSTERY

1. Remove the ten (10) phillips screws and washers that secure the back upholstery to the

back canes.

2. Remove existing back upholstery from back canes.
3. Install new back upholstery onto the back canes.
4. Install the ten (10) phillips screws and washers that secure the back upholstery to the

back canes.

HEADREST UPHOLSTERY

1. Remove the six (6) phillips screws and washers that secure the headrest upholstery to the

headrest extensions.

2. Remove the existing headrest upholstery from the headrest extensions.
3. Install the new headrest upholstery onto the headrest extensions.
4. Install the six (6) phillips screws and washers that secure the headrest upholstery to the

headrest extensions.

FIGURE 2 - REPLACING BACK/HEADREST UPHOLSTERY

Headrest

Upholstery

Headrest Extension

Back Cane

Back Upholstery

Phillips Screw

Washer

ADJUSTING THE RECLINER CABLES

NOTE: Refer to ADJUSTING THE GAS CYLINDERS in this section of the manual.

RECLINER BACK OPTION

RECLINER BACK OPTION

PROCEDURE 10

RECLINER BACK OPTION

Advertising
This manual is related to the following products: