Invacare 1080556 - Manual (Page 70)

Solara™ 70 Part No. 1080556 Rev. I
REPLACING THE CONTRACTURE FOOTPLATE HEEL LOOP
(FIGURE 9)
NOTE: This procedure applies to the bilateral contracture footplate only.
1. Tilt the contracture footplate forward to gain access to the mounting screws that secure the heel
loop to the underside of the contracture footplate. Refer to ANGLE ADJUSTMENT OF THE
CONTRACTURE FOOTPLATE in this procedure of the manual.
2. Remove the four (4) mounting screws and washers that secure the EXISTING heel loop to
the contracture footplate.
3. Reverse STEPS 1-2 to install the NEW heel loop.
FIGURE 9 - REPLACING THE CONTRACTURE FOOTPLATE HEEL LOOP
Contracture Footplate
Washers
Heel Loop
Mounting Screws
Washers
CONTRACTURE
FOOTPLATE OPTION
CONTRACTURE FOOTPLATE
OPTION
CONTRACTURE FOOTPLATE OPTION PROCEDURE 11