Intel OCPRF100 MP - Manual (Page 12)

OCPRF100 MP Server System Technical Product Specification
Revision 1.0
5
Figure 2-3: Peripheral Bay
2.3 Top Cover Assembly
The top cover assembly is released by removing the two retaining screws located on the top
toward the front (E in Figure 2-4: Hot-plug PCI Access Door), between the fan bay assembly and
the top cover assembly marked with the AC caution icon. The cover slides toward the rear of the
server and then lifts straight up off of the server chassis, exposing the upper portion of the server
for maintenance, upgrades, or adding components.
Tape and sheet metal work were done to the sides of the top cover assembly to provide a better
gripping surface for easier removal and replacement of the top cover assembly. Care should be
taken to avoid damage to the electromagnetic compatibility (EMC) gasket material on the inside
of the top cover.