Intel OCPRF100 MP - Manual (Page 87)

OCPRF100 MP Server System Technical Product Specification
Revision 1.0
80
NOTES: Default values are marked with the "†" symbol.
Table 6-9: PCI Mode Submenu
Feature Option Description
Option ROM Scan Disabled
Enabled† Enables option ROM scan.
Enable Master Disabled
Enabled† Enables device(s) as a PCI bus master.
Latency Timer Default
0020h
0040h
0060h
0080h†
00A0h
00C0h
00E0h Specifies the minimum guaranteed number of PCI bus clocks that a device
can master on a PCI bus during one transaction.
Table 6-10: I/O Device Configuration Submenu
Feature Option Description
Serial Port A Disabled
Enabled†
Auto If set to “Auto,” BIOS configures the port.
Base I/O Address 3F8h†
2F8h
3E8h
2E8h Selects the base I/O address for COM port A.
Interrupt IRQ 3
IRQ 4† Selects the IRQ for COM port A.
Serial Port B Disabled
Enabled†
Auto If set to “Auto,” BIOS configures the port.
Base I/O Address 3F8h
2F8h†
3E8h
2E8h Selects the base I/O address for COM port B.
Interrupt IRQ 3†
IRQ 4 Selects the IRQ for COM port B.
Parallel Port Disabled
Enabled†
Auto If set to “Auto,” BIOS configures the port.