Intel OCPRF100 MP - Manual (Page 93)

OCPRF100 MP Server System Technical Product Specification
Revision 1.0
86
NOTES: Default values are marked with the "†" symbol.
6.3.6 Exit Menu
Table 6-18 describes the Exit Menu.
6.4 Flash Utility
The Flash Memory Update utility (iFLASH) updates the flash ROM with new system software.
The loaded code and data include the following:
Message Timeout Mul-
tiplier 1†
2
4
8
10
50
100
1000 All I
2
O message timeout values are multiplied by this number.
Pause During POST Disabled†
Enabled Use this to start the IRTOS (I
2
O Real Time Operating System) man-
ually. When POST has stopped, it issues three beeps. Pressing any
key continues POST.
Table 6-18: Exit Menu
Option Description
Exit Saving Changes Exit Setup and save changes.
Exit Discarding Changes Exit Setup without saving changes.
Load Setup Defaults Load default values for all Setup items.
Load Custom Defaults Load settings from Custom Defaults.
Save Custom Defaults Save changes as Custom Defaults. If CMOS fails, BIOS uses Custom
Defaults if available. If not, it uses the factory defaults.
Discard Changes Load previous values of all Setup items.
Save Changes Save all changes.
Table 6-17: Boot Menu