Intel OCPRF100 MP - Manual (Page 25)

OCPRF100 MP Server System Technical Product Specification
Revision 1.0
18
up to 16 GB of error correction code (ECC) PC-100 compatible registered DIMMs. The I/O carrier
contains four 66-MHz and six 33-MHz 64-bit hot-swap PCI slots, I/O ports, and various control-
lers.
Figure 3-1: OCPRF100 MP Server System Chassis with Peripheral Bay shows an isometric view
of the chassis with the peripheral bay installed.
Figure 3-1: OCPRF100 MP Server System Chassis with Peripheral Bay
Figure 3-2: OPRF100 Board Set/System Board Locations within Server Chassis displays the lay-
out of the OPRF100 board set with respect to location within the chassis. The Profusion carrier
and I/O carrier are mounted horizontally, with the Profusion carrier toward the front of the chassis
and the I/O carrier immediately behind at the rear of the chassis. The midplane distributes power
and signal connections to all boards. The midplane resides between the Profusion carrier and the
I/O carrier, and interconnects these carriers with the memory carriers and system power sup-
plies. The front panel resides in front of the Profusion carrier in the same plane and provides the
user interface, system management, and cooling system power and control.