1 cables, Cables – Intel OCPRF100 MP User Manual
Page 48
OCPRF100 MP Server System Technical Product Specification
Revision 1.0
41
4.1
Cables
Table 4-1 through Table 4-3 list flat ribbon cables and wire bundles that are used in the assembly
of the OCPRF100 MP server system.
Table 4-1: Flat Ribbon Cables
Quantity
Number
of Pins
Type
Path
1
68
Wide SCSI cable w/VHDCI
interconnect module (solid
core)
Routes from the PHP I/O carrier to a panel cut in the
back of the system, where a VHDCI interconnect mod-
ule can link an external VHDCI cable with the internal
SCSI devices.
1
68
Wide SCSI cable (solid core)
From the PHP I/O carrier to the peripheral bay back-
plane.
1
40
IDE cable (long)
From the I/O carrier to the peripheral bay backplane.
1
40
IDE cable (short)
From the LVDS backplane to the IDE CD-ROM.
1
34
Floppy drive cable (long)
From the I/O carrier to the peripheral bay backplane.
1
34
Floppy drive cable (short)
From the LVDS backplane to the floppy drive.
1
40
Flat ribbon cable (LED board)
From the I/O board to the PHP LED board
Table 4-2: Wire Bundles
Quantity
Number
of Pins
Type
Path
1
4
Power cable
From the LVDS backplane
to the CD ROM and floppy
drive.
1
20
Power cable
From the midplane to the
peripheral bay backplane.
Table 4-3: Optional Cable
Quantity
Number
of Pins
Type
Path
1
50
Narrow SCSI cable
From the LVDS backplane to the 5-1/4" device bay, if an
IDE device is not present.