Intel OCPRF100 MP User Manual
Page 28
OCPRF100 MP Server System Technical Product Specification
Revision 1.0
21
Figure 3-4: Front View of Chassis with No Bezel
Table 3-2: System Features – Front
Item
Feature
Description
Front Panel Controls and Indicators
A
Power switch
When pressed, turns the DC power inside the server on or off.
B
Reset switch
When pressed, resets the server and causes the power-on self-test
(POST) to run.
C
NMI switch
When pressed, causes a nonmaskable interrupt (NMI). This switch is
recessed behind the front panel to prevent inadvertent activation. (The
switch must be pressed with a narrow tool.)
D
Power (LED) (green)
When continuously lit, indicates the presence of DC power in the server.
The light emitting diode (LED) goes out when the power is turned off or
when the power source is disrupted. When flashing, indicates the system is
in advanced configuration and power interface (ACPI) sleep mode.
E
Power fault LED (yellow)
When continuously lit, indicates a power supply failure. When flashing, indi-
cates a 240 VA overload shutdown and power control failure.
I J K L M N
O P Q
A B C D E F G H