IBM SG24-4576-00 - Manual (Page 100)

3.4.4 Backup/Restore System Programs Menu
When you select this option from the Main Menu, a screen like the one in
Figure 40 will appear.
Backup / Restore System Programs
Select One:
1.-Backup the system diskette
2.-Backup the system partition
3.-Restore the system partition
Enter F1=Help F3=Exit
Figure 40. System Programs - Backup/Restore System Programs M e n u
The following options are available:
1. Backup the system diskettes
Makes a backup copy of the Reference and Diagnostic diskettes.
2. Backup the system partition
Makes a backup of the system partition from the hard disk drive to diskettes.
You need two diskettes to perform this procedure.
3. Restore system partition
Restores the system partition from the backup diskettes. Use this utility
program to rebuild the system partition in case of accidental loss or damage.
Note
You can only use this option when the system programs are running from a
diskette.
3.4.5 Set Configuration Menu
The Set Configuration menu allows you to work with the system configuration.
Select this option to view, change, backup or restore the configuration. The Set
Configuration menu is shown in Figure 41 on page 87.
86
NetWare Integration Guide