IBM SG24-4576-00 - Manual (Page 121)

IBM RAID Controller Configuration Ver 2.12
Adapter in Slot 1
┌────────────────────────────┐ ┌───────────┐ ┌───────────┐
│ Create/Delete Array │ │┌─────────┐│ │┌─────────┐│
├────────────────────────────┤ │└Ch 1┘│ │└Ch 2┘│
│1. Help │ │┌─Bay │ │┌─Bay │
│2. Define hot-spare drive │ ││ Array ──┐│ ││ Array ──┐│
│3. Delete disk array │ │ ┌─────┐ │ │ ┌─────┐ │
│4. Create disk array │ │1 └ ┘ │ │1 └ ┘ │
│5. Define Logical drive │ │ ┌─────┐ │ │ ┌─────┐ │
│6. Format drive │ │2 └ ┘ │ │2 └ ┘ │
│7. Exit │ │ ┌─────┐ │ │ ┌─────┐ │
└────────────────────────────┘ │3 └ RDY ┘ │ │3 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│4 └ RDY ┘
│ │4 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│5 └ RDY ┘
│ │5 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│6 └ RDY
│ │6 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│7 └
┘ │ │7 └ ┘ │
└───────────┘ └───────────┘
Figure 60. RAID Configuration Program - Create/Delete A r r a y M e n u
1. Select Define hot-spare drive. The cursor becomes active in the Bay/Array
selection list.
2. Use the up and down arrow keys to select the RDY (ready) drive to be used
as a hot-spare and press Enter. The RDY status changes to HSP (hot-spare).
Figure 61 shows an example where a hot-spare disk has been defined.
3. Press Esc to validate.
Notes:
1. The hot-spare drive is not associated with any array. If m o r e than one array
is defined, you need only 1 hot-spare drive for all the arrays.
2. If the disks have different sizes, the hot-spare drive must be the largest.
IBM RAID Controller Configuration Ver 2.12
Adapter in Slot 1
┌────────────────────────────┐ ┌───────────┐ ┌───────────┐
│ Create/Delete Array │ │┌─────────┐│ │┌─────────┐│
├────────────────────────────┤ │└Ch 1┘│ │└Ch 2┘│
│1. Help │ │┌─Bay │ │┌─Bay │
│2. Define hot-spare drive │ ││ Array ──┐│ ││ Array ──┐│
│3. Delete disk array │ │ ┌─────┐ │ │ ┌─────┐ │
│4. Create disk array │ │1 └ ┘ │ │1 └ ┘ │
│5. Define Logical drive │ │ ┌─────┐ │ │ ┌─────┐ │
│6. Format drive │ │2 └ ┘ │ │2 └ ┘ │
│7. Exit │ │ ┌─────┐ │ │ ┌─────┐ │
└────────────────────────────┘ │3 └ HSP ┘ │ │3 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│4 └ RDY ┘
│ │4 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│5 └ RDY ┘
│ │5 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│6 └ RDY
│ │6 └ ┘ │
│ ┌─────┐ │ │ ┌─────┐ │
│7 └
┘ │ │7 └ ┘ │
└───────────┘ └───────────┘
Figure 61. RAID Configuration Program - Hot-Spare Disk Definition
Chapter 3. H a r d w a r e Configuration
107