IBM SG24-4576-00 - Manual (Page 137)

Figure 76. Unlocking Programs
12. When the server comes back up, you will see a screen like the one in
Figure 76. Enter the activation keys for the NetWare version selected as
shown in Figure 71 on page 119.
13. Select Unlock.
14. You are prompted to insert the NetWare CD and remove the license diskette.
ServerGuide proceeds with the installation.
Attention
While ServerGuide is installing software, be sure not to touch any keys
on the keyboard unless prompted by the install program. You will see
the NetWare installation panels come up and change quickly as the
ServerGuide installation progresses. However, do not touch any keys
unless
ServerGuide prompts you to do so.
15. If you selected to install NetFinity Services for NetWare, you are prompted to
change the NetWare CD to the NetFinity CD.
16. Press Enter to exit from ServerGuide when all files have been transferred
from the CD to hard disk.
17. Type DOWN at the colon prompt and then press Enter.
18. Type EXIT at the colon prompt and then press Enter to exit to DOS.
Note
At this point, the NetWare operating system has been installed. However,
NetWare Directory Services (NDS) has not been installed. The following
steps take you through this process.
124
NetWare Integration Guide