Simulating without a hot spare drive, 2 simulating without a hot spare drive – IBM SG24-4576-00 User Manual
Page 173
Advertising
Figure 127. NetFinity RAID Service - N e w Hot Spare
You can see that a new disk is enclosed in a box. It is the new hot spare
drive in the array configuration.
This simulation is complete.
4.8.2 Simulating without a Hot Spare Drive
To do the same test without a hot spare drive:
1. Start the RAID Administration for NetWare Utility.
2. Select Show Drive Information to review the array configuration.
A screen like the one in Figure 128 will appear.
Figure 128. RAID Administration - A r r a y Configuration
The array configuration can also be verified using the NetFinity RAID service
(see Figure 129 on page 161).
160
NetWare Integration Guide
Advertising