IBM SG24-4576-00 - Manual (Page 101)

Set Configuration
Select One:
1.-View configuration
2.-Change configuration
3.-Backup configuration
4.-Restore configuration
5.-Run automatic
6.-Display memory map
7.-Set and view SCSI device configuration
Enter F1=Help F3=Exit
Figure 41. System Programs - Set Configuration M e n u
The following options are available:
1. View configuration
This displays the present configuration information which includes the size of
the memory installed in the server, the assignment of the built-in features,
and the location of installed adapters and their parameter settings.
Figure 42 on page 88 is an example of a configuration screen.
Chapter 3. H a r d w a r e Configuration
87