IBM SG24-4576-00 - Manual (Page 213)

Appendix C. Configuring DOS CD-ROM Support
This appendix is included to aid in configuring CD-ROM support in the DOS
environment.
C.1 Installing CD-ROM Support for PCI Adapters.
To install CD-ROM support for an IBM PC Server with a PCI SCSI adapter:
1. Copy the following files from the ServerGuide license diskette to the hard
disk (C:SERVER directory):
• IBMPRAID.SYS
• IBMASPI.SYS
• DAFCDA.SYS
• MSCDEX.EXE
2. Add the following statements to the CONFIG.SYS file:
DEVICE=C:SERVERIBMPRAID.SYS
DEVICE=C:SERVERIBMASPI.SYS
DEVICE=C:SERVERDAFCDA.SYS
3. Add the following statement to the AUTOEXEC.BAT file:
C:SERVERMSCDEX /D:IBMCD001 /M:10 /L:E
C.2 Installing CD-ROM Support for Adaptec Adapters
To install CD-ROM support for an IBM PC Server with an Adaptec SCSI adapter:
1. Copy the following files from the ServerGuide license diskette to the hard
disk (C:SERVER directory):
• ASPI8DOS.SYS
• ASPICD.SYS
• MSCDEX.EXE
2. Add the following statements to the CONFIG.SYS file:
DEVICE=C:SERVERASPI8DOS.SYS /D
DEVICE=C:SERVERASPICD.SYS /D:ASPICD0
3. Add the following statement to the AUTOEXEC.BAT file:
C:SERVERMSCDEX /D:IBMCD001 /M:10 /L:
C.3 Installing CD-ROM Support for Micro-Channel Adapters
To install CD-ROM support for an IBM PC Server with a Micro-Channel SCSI
adapter:
1. Copy the following files from the ServerGuide license diskette to the hard
disk (C:SERVER directory):
• IBMRAID.SYS
• RDASPI.SYS
• IBMCDROM.SYS
• RDCDROM.SYS
• RAMDRIVE.SYS

Copyright IBM Corp. 1995
203