Hard disk drives, 4 hard disk drives, 1 summary – IBM SG24-4576-00 User Manual

Page 36

Advertising
background image

In addition to the features supported with the IBM SCSI-2 F/W PCI Adapter,
the IBM SCSI-2 F/W RAID adapter provides a RAID controller. Please
reference 1.6.5, “RAID Technology” on page 22 for a discussion on RAID.

1.6.3.1 Summary

The following tables summarize the features of the IBM SCSI adapters.

Table 3. SCSI Adapters S u m m a r y

Attribute

SCSI Adapter
with no Cache

Enhanced
SCSI Adapter
with Cache

SCSI-2
Fast/Wide
Adapter/A

SCSI-2
Fast/Wide
Streaming
RAID
Adapter/A

SCSI Bus Width

16-bit

32-bit

32-bit

32-bit

SCSI Data Transfer Rate

5 MBps

5 MBps

20 MBps

20 MBps

Micro Channel Data Transfer Rate

8.3 MBps

16.6 MBps

20 MBps

40/80 MBps

Parity

Optional

Optional

Yes

Yes

Tagged Command Queueing
(TCQ)

N/A

N/A

Yes

Yes

Systems where implemented

500

500/720

Note:

Fast and Wide are data transfer methods as defined in SCSI-II.

The 720 will support 80 MBps data streaming with the SCSI-2 Fast/Wide Streaming RAID Adapter/A

N / A = n o t a v a i l a b l e

Table 4. PCI SCSI Adapters S u m m a r y

Attribute

PCI SCSI-2 Fast
Adapter

PCI SCSI-2
Fast/Wide Adapter

PCI SCSI-2
Fast/Wide RAID
Adapter

SCSI Bus Width

32-bit

32-bit

32-bit

SCSI Data Transfer Rate

10 MBps

20 MBps

20 MBps

Parity

Yes

Yes

Yes

Tagged Command Queueing (TCQ)

Yes

Yes

Yes

Systems where implemented

PC Server 300/310

PC Server 320/520

PC Server 320/520

Note:

Fast and Wide are data transfer methods as defined in SCSI-II

1.6.4 Hard Disk Drives

Ultimately, the hard disk drive is the component that has the most effect on
subsystem performance. The following specs should be considered when
evaluating hard disks in order to optimize performance:

Average access time

Maximum transfer rate

On-board cache size

Average access time is one of the standard indicators of hard drive performance.
This is the amount of time required for the drive to deliver data after the
computer sends a read request. It is composed of two factors, the seek time and
the rotational delay. The seek time is the time necessary to position the heads

Chapter 1. IBM PC Server Technologies

21

Advertising