IBM SG24-4576-00 - Manual (Page 114)

1. Start the system programs.
2. When the system programs main menu appears, press and hold Ctrl and
then press A. A message appears telling you to insert the diagnostic
diskette.
3. Insert the diagnostic diskette.
After a few seconds, a screen like the one in Figure 52 appears.
Advanced Diagnostic Menu
Select One:
1.-Run System Checkout
2.-Format the hard disk
Enter F1=Help F3=Exit
Figure 52. Advanced Diagnostic M e n u
The following choices are available:
Run System Checkout: If you select this option the following menu appears:
Test Selection Menu
Select One:
1.-Run the test one time
2.-Run the test continuously
3.-Log or display the errors
4.-Display the device list
Enter F1=Help F3=Exit
Figure 53. Test Selection M e n u
1. Run the test one time
100
NetWare Integration Guide