J. T. Eaton Liquid-Cooled Drives LCX9000 - Manual (Page 10)

LCX9000 Liquid-Cooled Drives User Manual
viii For more information visit: www.EatonElectrical.com MN04005001E
January 2007
Warnings, Cautions and Notices
Read this manual thoroughly and make sure you understand the procedures before you
attempt to install, set up, or operate this Cutler-Hammer
®
LCX9000 Drive from Eaton’s
electrical business.
Warnings
WARNING
Only a competent electrician may carry out the electrical
installation.
WARNING
The LCX9000 Liquid-Cooled drive is meant for fixed installations only.
WARNING
Do not perform any measurements when the drive is connected to
the mains. Prior to measurements on the motor or the motor cable,
disconnect the motor cable from the drive.
WARNING
The drive has a capacitive leakage current.
WARNING
If the drive is used as a part of a machine, the machine
manufacturer is responsible for providing the machine with a main
switch (EN 60204-1).
WARNING
Only spare parts delivered by Eaton can be used.
WARNING
The motor starts at power-up if the start command is “ON”.
Furthermore, the I/O functionalities (including start inputs) may
change if parameters, applications or software are changed.
Disconnect, therefore, the motor if an unexpected start can cause
danger.
WARNING
The components of the power unit of the drive are live when it is
connected to mains potential. Coming into contact with this
voltage is extremely dangerous and may cause death or severe
injury.
The control unit is isolated from the mains potential.