J. T. Eaton Liquid-Cooled Drives LCX9000 - Manual (Page 59)

LCX9000 Liquid-Cooled Drives User Manual
MN04005001E For more information visit: www.EatonElectrical.com 4-1
January 2007
Chapter 4 — Control Wiring and Internal Connections
The control unit of the Cutler-Hammer Liquid-Cooled drive is installed into a mounting box. It
contains the control board and additional boards (see Figures 4-1 and 4-2) connected to the
five slot connectors (A to E) of the control board. The control unit and the ASIC of the power
unit are connected through cables (and an adapter board). For more information, see Page
4-17.
The mounting box with the control unit is mounted inside an enclosure. See the mounting
instructions on Page 4-10.
Figure 4-1: Control Board