Chapter 4. configuration settings, Verifying configuration settings, Configuration settings – Sun Microsystems StorEdge 6900 Series User Manual
Page 63: To verify configuration settings
47
C H A P T E R
4
Configuration Settings
This chapter contains the following sections:
■
“Verifying Configuration Settings” on page 47
■
“To Clear the Lock File” on page 50
For a complete listing of SUNWsecfg Error Messages and recommended action, refer
to Appendix B.
Verifying Configuration Settings
During the course of troubleshooting, you might need to verify configuration
settings on the various components in the Sun StorEdge 3900 or 6900 series.
▼
To Verify Configuration Settings
●
Run one of the following scripts:
■
Use the
/opt/SUNWsecfg/runsecfg
script and select the various Verify menu
selections.
■
Run the
/opt/SUNWsecfg/bin/checkdefaultconfig
script to check all
accessible components. The output is shown in
■
Run the
checkswitch
|
checkt3config
|
checkve
|
checkvemap
scripts
manually from
/opt/SUNwsecfg/bin.
The scripts listed above check the default configuration files in the
/opt/
SUNWsecfg/etc
directory and compare the current, live settings to those of the
defaults. Any differences are marked with a FAIL.