Sharp AM-900 - Manual (Page 101)

Distinctive Ring (Requires Subscription to Service)
99
5. Special Function
s
4
Press a number from 1 to 3 (1 to 5 in Canada) to select the ring pattern
below that matches your second number’s ring pattern. To have the
machine automatically answer your normal telephone number, press 6.
To turn off the distinctive ring function, press 7.
: PATTERN 1 Two short rings
: PATTERN 2 One short, one long, and one short ring
: PATTERN 3 Two short rings and one long ring
: PATTERN 4 Three very short rings (Canada only)
: PATTERN 5 Two very short rings (Canada only)
: STANDARD RING Your standard (normal) ring pattern
: OFF SETTING Turn distinctive ring off
5
Press repeatedly to exit.
6
Make sure that the reception mode is set to FAX ONLY (see page 93).
x When using distinctive ring, you must set the reception mode to FAX ONLY.
When your designated fax number is dialed, the machine will automatically
answer and begin reception after two rings. Note that other devices on the
same line will also ring until the machine answers. If one of your other
numbers is dialed, the machine will ring; however, it will not answer.
The display briefly shows
your selection, then:
1:RECEPTION MODE