Sharp AM-900 - Manual (Page 120)

Scanning From the Operation Panel
118
Scanning From the Operation Panel
You can scan directly from the machine by selecting scan mode and then one
of six scan menus on the operation panel.
i Before you can use a scan menu, you must link a program on your
computer to the scan menu. When you scan using that scan menu, the
linked program automatically starts on your computer and the image is
scanned into that program.
i Six scan menus (SC1 to SC6) are available on the machine. The programs
that are available on your computer to link to scan menus will vary
depending on your system and what programs you have installed.
Linking programs to scan menus
Follow the appropriate procedure below for your operating system to link
programs to scan menus.
Windows
“
XP
1 . Click the start button, click Control Panel, click Printers and Other
Hardware, and then click Scanners and Cameras.
2 . Right-click the SHARP AM-900 icon and select Properties.