Sharp AM-900 - Manual (Page 67)

65
3. Sending
Fa
x
e
s
3. Sending Faxes
Sending a Fax
Follow the steps below to send a fax. To dial the fax number of the receiving
machine, you can either directly enter the number with the number keys
(Direct Keypad Dialing), or press and enter a two-digit Speed Dial
number (Speed Dialing).
i To use a Speed Dial number, you must first store the number in the
machine as explained on page 70.
i You can perform the following procedure even when the machine is already
busy sending or receiving a fax. In this case, the fax transmission will be
stored in the machine’s memory and performed once all previously stored
jobs have been completed.
SPEED
1
Make sure that the date and time
display of fax mode appears (if needed
press ).
FAX
10/03 11:37 FAX
Display:

FAX
Date and
time Reception
mode
(page 93)