Sharp AM-900 - Manual (Page 68)

Sending a Fax
66
2
Place the original on the document glass or in the auto document
feeder.
Using the document glass:
Open the document glass cover and place
the original face down on the glass with
the top edge against the document guide.
x Make sure the center of the original is
aligned with the center mark on the
document guide, and then close the
cover.
Using the auto document feeder:
Adjust the document guide to the width of
your original(s), and then insert the
original face up into the feeder.
x Up to 20 letter-size sheets can be
inserted at once.
x For detailed information on using the
auto document feeder and the types of
originals that can be used, see pages
60 to 62.
i If an original is placed in both the auto document feeder and on the
document glass, the original in the auto document feeder will be faxed.
i When the document glass is used to send a fax, the document image
printed by the receiving machine may be reduced slightly more than when
the auto document feeder is used, and there may be a slightly larger
margin at the bottom of the page (this will depend on the size of paper
used by the receiving machine).