Sharp AM-900 - Manual (Page 21)

Installing the Toner Cartridge and Drum Cartridge
19
1. Installation
Resetting the drum counter
Each time you install a new drum cartridge, follow the steps below to reset the
drum counter to zero.
1
Press and then or
repeatedly until the display at right
appears.
2
Press .
3
Press .
4
Press repeatedly to exit.
MENU
Z A
Display:
LIFE
7
If you installed a new toner cartridge,
press to select YES (this will
reset the toner counter to zero).
x If you temporarily removed and then replaced an old toner cartridge for
maintenance or other reason, press to continue using the previous
toner count. (Note: Be sure to press or the machine will not alert you
when the toner cartridge is out of toner.)
8
Press .
9
If you installed a new drum cartridge, reset the drum counter as
explained below.
CLEAR: START KEY
DRUM COUNTER
NEW TONER?
OK: PRESS START
1: LIFE COUNTER